The following warnings occurred: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Warning [2] preg_match(): Compilation failed: invalid range in character class at offset 49 - Line: 28 - File: inc/plugins/automedia/mediasites/twitter.php PHP 7.4.33 (Linux)
|
![]() |
Power Rating - Printable Version +- Midnite Challenge Forums (http://www.midnitechallenge.com/forums) +-- Forum: Midnite Challenge (http://www.midnitechallenge.com/forums/forumdisplay.php?fid=3) +--- Forum: Cars, Mods and Tuning (http://www.midnitechallenge.com/forums/forumdisplay.php?fid=10) +--- Thread: Power Rating (/showthread.php?tid=3432) |
Power Rating - Porsche504 - 05-19-2007 Ok im confused, when i put turbos and superchargers on my car, they run slower then if i did just pure NA parts and weight reduction and port and polish upgrades?? so which is better high horsepower and high PR or fast car with no parts except for weight reduction and port and polish????? Power Rating - TheAirMan - 05-19-2007 Try test n tune.. and upgrade the turbos on ur car lol.. a combination of both will lead to faster times :roll: Power Rating - R_Y_A_N - 05-20-2007 You're obviously installing the wrong parts onto the car. What type of car do you have, tell me that and ill get you a parts list, once you hit a level around 30, all you really need is weight redo and port'n'polish to level 10, that should leave you PR around 1000 or a little less, any higher than 1000 is just a waste of feul/nos. Once you got weight redo and pnp, dyno to 100% then tnt the car and you'll be fine, hope this helps Power Rating - bscar - 05-20-2007 my cobra has like 550 pr and it's doing high 8's low 9s with level 34 and only pnp/weight on top of the parts Power Rating - joedabooger - 05-20-2007 i run 8.3 with just weight reduction if u have lvl 10 weight reduction u dont need nethin else but suspension of course |